Connecting your Philips Signage screen to WiFi
On your Philips remote control, press the below button sequence. This occasionally won't work if you do it too quickly, or too slowly. Ensure you press the buttons in sequence in around 3 seconds.
HOME -> 1 -> 8 -> 8 -> 8
If you have done it successfully, you should see the below screen.
Use the directional keypad to browse to Network -> WiFi.
Toggle WiFi on using the toggle switch in the top-right corner. The system will search for available WiFi networks.
Select your desired network and enter the password. Once done, tap Connect.
Once connected, you should now have internet access! Hit the back button several times to go back to your content, or simply power cycle the screen.
Related Articles
Philips Screen Configuration for Signage
Philips Remote Initial Screen Setup This may or may not be applicable - if the screen has been preconfigured by us or the supplier, this step won't apply. Connect the screen to power Welcome Select language with Up and Down arrows Once selected, ...Assigning Host on Philips Android
Teamviewer Host allows us unattended remote access into the display to provide remote support in the event of a software fault. Most newer Philips Signage panels come pre-installed with Teamviewer Host, and it's a simple matter of assigning it to our ...